What are the precautions for using a high-speed polishing machine?

1、 If the following situations are found, the high-speed polishing machine should not be used

The operator has not received professional training.

The operator has not studied the 'operating procedures'.

The high-speed polishing machine is not functioning properly.

2、 Before using a high-speed polishing machine, the following environmental checks should be conducted

The operator's hands and feet should be kept away from the rotating polishing head.

The operator shall not step on the power cord or wrap the power cord into the polishing head.

The polishing area shall not exceed the length of the power cord.

The operator shall not take off the operating handle without authorization. When stopping, the handle can only be released after the high-speed polishing machine has completely stopped rotating.

Do not use polishing pads with dust or dirt on them for polishing. When polishing pads with too much dirt cannot be cleaned thoroughly, replace them in a timely manner.

When replacing or installing polishing pads, the power must be cut off.

3、 Storage of high-speed polishing machine

Cut off the power supply.

Tilt backwards and store with the rear wheels on the ground.

It should not be stored outdoors and should be stored in a dry place