What are the outstanding features of automatic polishing machine equipment?

Polishing machine manufacturers tell everyone that with the rapid development of various industries, automatic polishing machine equipment is needed in more and more fields, and automatic polishing machines also play a very important role, occupying a significant advantageous position. So, what are the main characteristics of automatic polishing machines? Today, we will introduce them in detail:

The important layouts include: the main motor drive mechanism, the belt pulley system that mobilizes the rotating body to rotate, the disc reverse rotating body that performs planetary transmission, the drum, the sprocket system that mobilizes the drum to rotate, the sprocket reducer machine negotiation and control system that controls the drum rotation and unloading, and the safety system for tranquility.

Important principle: Install four hexagonal rollers at equal intervals on the circumference of the rotating body. The rollers revolve around the rotating body on one hand, and on the other hand, under the action of the sprocket system, the polishing machine rollers rotate around their own axis (in opposite directions).

The outstanding features of the automatic polishing machine are as follows:

1. Using the principles of planetary rotation and centrifugal activity, the parts and polishing abrasive are mutually ground and polished during their revolution and rotation;

2. Practical batch of small and medium-sized parts, especially those with irregular cavities and workpieces that have undergone heat treatment penalties, can improve efficiency by 10-20 times;

3. Hexagonal bucket lined with rubber or polyurethane (PU), synchronous belt drive, stable operation, low noise;

4. Built in four hexagonal buckets are arranged in a horizontal manner, and the polyurethane inner bucket can be exchanged. The rolling bucket group can be exchanged without affecting the working time of the main engine;

5. The volume of the objects (workpieces, grinding stones, water, etc.) in each drum shall not exceed 45% to 55% of the drum capacity;

6. The ratio of the workpiece to the grinding stone is usually 1:1 to 1:5, and for fine grinding with a polishing machine, it is 1:10. The detailed workpiece should be determined after testing;

7. The duration of a single task should generally be around 1 hour. If it is necessary to inherit the task, the heat-resistant boundary temperature of the inner lining rubber layer of the drum should not exceed 80 ℃. After exchanging water and abrasives about 1 hour, the task should be carried out.

It is precisely because polishing machine equipment has the above advantages and characteristics that it is widely used in multiple fields and has received attention from people.